Inconel 600 Stranded Filter Cloth

Inconel 600 Stranded Filter Cloth (UNS N06600) is a specialized engineering material that offers excellent resistance to corrosion, heat and oxidation. It is used in the elevated temperature conditions up to 2150 Degree F where corrosion risk due to oxidizing and reducing conditions is intense.

Inconel 600 Chemical Composition:

C Cr Cu Fe Mn Ni Si S
0.15 % 14 – 17 % 0.5 % 6 – 10 % 1 % Bal 0.5 % 0.015 %

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

 

Inconel 600 Standard Grade Wire Cloth

Inconel 600 UNS # –   N06600Inconel 600 corrosion resistance

600 alloy for a variety of corrosive media are corrosion resistance. The composition of the chromium makes the alloy better resistant to corrosion than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon) under oxidizing conditions. At the same time, the higher nickel content of the alloy in the reduction conditions and alkaline solution has a good corrosion resistance, and can effectively prevent the chlorine – iron stress corrosion cracking. 600 alloy in acetic acid, acetic acid, formic acid, stearic acid and other organic acids have good corrosion resistance, in the inorganic acid with moderate corrosion resistance. In the nuclear reactor in a single and secondary recycling of high purity water has a very good corrosion resistance. 600 is particularly prominent performance is able to resist dry chlorine and hydrogen chloride corrosion, the application temperature of 650 ℃. At high temperatures, the annealed and solution-treated alloys have excellent oxidation resistance and high strength in the air. The alloy is also resistant to ammonia and nitriding, carburizing atmosphere, but in the redox conditions change alternately, the alloy will be part of the oxidation medium corrosion.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

80mesh Inconel 600 Wire Mesh

Specification:

1. Mesh Count: 80mesh/inch
2. Wire Diameter: 0.10mm
3. Width Opening: 0.21mm
4. Open Area: 47%
5. Weight: 0.42kgs/m2
6. Packing: waterproof paper with plastic cloth,then wooden case.
7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 600 UNS # –   N06600Inconel 600 corrosion resistance
600 alloy for a variety of corrosive media are corrosion resistance. The composition of the chromium makes the alloy better resistant to corrosion than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon) under oxidizing conditions. At the same time, the higher nickel content of the alloy in the reduction conditions and alkaline solution has a good corrosion resistance, and can effectively prevent the chlorine – iron stress corrosion cracking. 600 alloy in acetic acid, acetic acid, formic acid, stearic acid and other organic acids have good corrosion resistance, in the inorganic acid with moderate corrosion resistance. In the nuclear reactor in a single and secondary recycling of high purity water has a very good corrosion resistance. 600 is particularly prominent performance is able to resist dry chlorine and hydrogen chloride corrosion, the application temperature of 650 ℃. At high temperatures, the annealed and solution-treated alloys have excellent oxidation resistance and high strength in the air. The alloy is also resistant to ammonia and nitriding, carburizing atmosphere, but in the redox conditions change alternately, the alloy will be part of the oxidation medium corrosion.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

60mesh Inconel 600 Wire Mesh

Specification:

1. Mesh Count: 60mesh/inch
2. Wire Diameter: 0.12mm
3. Width Opening: 0.30mm
4. Open Area: 51%
5. Weight: 0.46kgs/m2
6. Packing: waterproof paper with plastic cloth,then wooden case.
7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 600 UNS # –   N06600

Nichrome 625 Chemical Composition %
C Cr Cu Fe Mn Ni S Si
0.15 14.0 – 17.0 0.5 6.0 – 10.0 1.0 72 0.015 0.5

Inconel 600 corrosion resistance
600 alloy for a variety of corrosive media are corrosion resistance. The composition of the chromium makes the alloy better resistant to corrosion than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon) under oxidizing conditions. At the same time, the higher nickel content of the alloy in the reduction conditions and alkaline solution has a good corrosion resistance, and can effectively prevent the chlorine – iron stress corrosion cracking. 600 alloy in acetic acid, acetic acid, formic acid, stearic acid and other organic acids have good corrosion resistance, in the inorganic acid with moderate corrosion resistance. In the nuclear reactor in a single and secondary recycling of high purity water has a very good corrosion resistance. 600 is particularly prominent performance is able to resist dry chlorine and hydrogen chloride corrosion, the application temperature of 650 ℃. At high temperatures, the annealed and solution-treated alloys have excellent oxidation resistance and high strength in the air. The alloy is also resistant to ammonia and nitriding, carburizing atmosphere, but in the redox conditions change alternately, the alloy will be part of the oxidation medium corrosion.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

30mesh Inconel 601 Wire Mesh

Specification:

1. Mesh Count: 30mesh/inch
2. Wire Diameter: 0.016″
3. Width Opening: 0.017″
4. Open Area: 26.9%
5. Weight: 2.56kgs/m2

6. Packing: waterproof paper with plastic cloth,then wooden case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 601 UNS # –   N06601

Nichrome 601 Chemical Composition %
Al C Cr Cu Mn Ni S Si Fe
1.0 – 1.7 0.1 21.0 – 25.0 1.0 1.0 58.0 – 63.0 0.015 0.50 Rem

30mesh Inconel 601 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

Inconel 600 wire mesh

Mesh/Inch: 10mesh to 200mesh.

Wire diameter: 0.05mm to 0.65mm

Inconel 625 wire mesh

Mesh/Inch: 4mesh to 100mesh.

Wire diameter: 0.10mm to 1.20mm

Inconel 718 Wire Mesh

Mesh/Inch: 26meshx26mesh,30meshx30mesh and 45meshx45mesh

Wire diameter: 0.07mm to 0.33mm.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

180mesh Inconel 600 Wire Mesh

Specification:

1. Mesh Count: 180mesh/inch
2. Wire Diameter: 0.04mm
3. Width Opening: 0.101mm
4. Open Area: 51.3%
5. Weight: 0.154kgs/m2

6. Packing: waterproof paper with plastic cloth,then wooden case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 600 UNS # –   N06600

Nichrome 625 Chemical Composition %
C Cr Cu Fe Mn Ni S Si
0.15 14.0 – 17.0 0.5 6.0 – 10.0 1.0 72 0.015 0.5

180mesh Inconel 600 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

40mesh Inconel 601 Wire Mesh

Specification:

1. Mesh Count: 40mesh/inch
2. Wire Diameter: 0.01″
3. Width Opening: 0.015″
4. Open Area: 36.0%
5. Weight: 1.33kgs/m2

6. Packing: waterproof paper with plastic cloth,then wooden case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 601 UNS # –   N06601

Nichrome 601 Chemical Composition %
Al C Cr Cu Mn Ni S Si Fe
1.0 – 1.7 0.1 21.0 – 25.0 1.0 1.0 58.0 – 63.0 0.015 0.50 Rem

40mesh Inconel 601 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

100mesh Inconel 625 Wire Mesh

Specification:

1. Mesh Count:100mesh/inch
2. Wire Diameter: 0.0045″
3. Width Opening: 0.0060″
4. Open Area: 30.3%
5. Weight: 0.64kgs/m2

6. Packing: waterproof paper with plastic cloth,then wooden case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

UNS # – N06625

Nichrome 625 Chemical Composition %
Al C Cb Cr Fe Mn Mo P S Si Ti Ni
0.40 0.10 3.15 – 4.15 20.0 – 23.0 5.0 0.50 8.0 – 10.0 0.015 0.15 0.5 0.40 Rem

Inconel wire mesh belongs to the nickel-based alloy wire mesh,can be used in a temperature range from low temperature to 1093 degrees,have no magnetism,cooling and welding performance is great,takeing good corrosion resistance to moderate intensity reduction environment,and corrosion will not happen in the chlorine ion and an alkaline salt solution.Products have been used in petrochemical industry,aerospace industry, hydropower and nuclear power,ship building,oil refining onshore and offshore oil and gas, pulp and paper,chemical,machinery and equipment manufacturing industry and a heat exchanger and other products,has win the customer high recognition.100mesh Inconel 625 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

Inconel 600 wire mesh

Mesh/Inch: 10mesh to 200mesh.

Wire diameter: 0.05mm to 0.65mm

Inconel 625 wire mesh

Mesh/Inch: 4mesh to 100mesh.

Wire diameter: 0.10mm to 1.20mm

Inconel 718 Wire Mesh

Mesh/Inch: 26meshx26mesh,30meshx30mesh and 45meshx45mesh

Wire diameter: 0.07mm to 0.33mm.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

100mesh Inconel 600 Wire Mesh

Specification:

1. Mesh Count: 100mesh/inch
2. Wire Diameter: 0.08mm
3. Width Opening: 0.174mm
4. Open Area: 46.9%
5. Weight: 0.34kgs/m2

6. Packing: waterproof paper with plastic cloth,then plywood case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 600 UNS # –   N06600

Nichrome 625 Chemical Composition %
C Cr Cu Fe Mn Ni S Si
0.15 14.0 – 17.0 0.5 6.0 – 10.0 1.0 72 0.015 0.5

100mesh Inconel 600 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

Inconel 600 wire mesh

Mesh/Inch: 10mesh to 200mesh.

Wire diameter: 0.05mm to 0.65mm

Inconel 625 wire mesh

Mesh/Inch: 4mesh to 100mesh.

Wire diameter: 0.10mm to 1.20mm

Inconel 718 Wire Mesh

Mesh/Inch: 26meshx26mesh,30meshx30mesh and 45meshx45mesh

Wire diameter: 0.07mm to 0.33mm.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com

40mesh 0.20mm Inconel 600 Wire Mesh

Specification:

1. Mesh Count: 40mesh/inch
2. Wire Diameter: 0.20mm
3. Width Opening: 0.435mm
4. Open Area: 46.9%
5. Weight: 0.85kgs/m2

6. Packing: waterproof paper with plastic cloth,then wooden case.

7. Roll size: width from 3′ to 6′, Length from 50′ to 200′.

Inconel 600 UNS # –   N06600

Nichrome 625 Chemical Composition %
C Cr Cu Fe Mn Ni S Si
0.15 14.0 – 17.0 0.5 6.0 – 10.0 1.0 72 0.015 0.5

40mesh 0.20mm Inconel 600 Wire MeshInconel wire meshes’ main material have inconel600, inconel 625, inconel 718.

Inconel 600 wire mesh

Mesh/Inch: 10mesh to 200mesh.

Wire diameter: 0.05mm to 0.65mm

Inconel 625 wire mesh

Mesh/Inch: 4mesh to 100mesh.

Wire diameter: 0.10mm to 1.20mm

Inconel 718 Wire Mesh

Mesh/Inch: 26meshx26mesh,30meshx30mesh and 45meshx45mesh

Wire diameter: 0.07mm to 0.33mm.

http://www.generalmesh.com www.generalmesh.com/blog/

MP:86-137-2282-3064| Skype:jennis01 | Wechat: 13722823064

Tel: +86-318-855784 | Fax: +86-318-7757320

Whatsapp: +8613722823064 |Viber : +8613722823064

E-mail: sales@geneneralmesh.com